In most cases, the finish is safe if you follow the manufacturer’s instructions for use and make sure the drain cleaner isn’t left on the finish for longer than 30 minutes.

• Touch-clean® Showerheads - wipe the face of the showerhead (rubber nubbins) to loosen and break away deposits. Learn more about Touch-clean.
• Non Touch-clean showerheads or stubborn deposits - unscrew the showerhead and soak it in a 50/50 vinegar and water solution for several hours. For stubborn deposits, rub with a toothbrush.

• Remove the aerator.  Soak it in vinegar overnight, then flush with water.
• For stubborn deposits, rub with a toothbrush.

We recommend cleaning your shower base with a non-abrasive and/or non-caustic cleaner to prevent scratching or dulling of the finish.

Always blot dry any water from faucet surface. Allowing water to evaporate on the surface can lead to build up of mineral deposits. Cleaning with a damp non-abrasive sponge and buffing it dry with a clean soft cloth should help keep your product looking beautiful. To remove water spots, use warm water and a soft, damp cloth. Hard water stains may be removed using a 50/50 solution of white vinegar and water.  Make certain that you rinse thoroughly with water afterward.

If additional cleaning is required, all of our finishes may be cleaned with the following household cleaners: Formula 409® Antibacterial All Purpose Cleaner, Fantastik® All Purpose Cleaner, or Windex® Original Glass Cleaner, when used according to the manufacturers' instructions for use. 

Avoid using the following which can damage your finish:

• Avoid industrial cleaners and abrasive cleaners, such as those used for toilet bowls, green Scotch-Brite heavy duty scrub sponges, Scrubbing Bubbles Bathroom Cleaner and Lysol Basin Tub, Soft Scrub, and Tile Cleaner.
• Avoid products that state on the label that they remove tarnish and rust, and those containing hydrofluoric, hydrochloric and/or phosphoric acids and caustic agents.
• Avoid harsh abrasives or polishes
• Avoid bleach-based cleaners 

• Always blot dry any water from faucet surface. Allowing water to evaporate on the surface can lead to build up of mineral deposits. Cleaning with a damp non-abrasive sponge and buffing it dry with a clean soft cloth should help keep your product looking beautiful. To remove water spots, use warm water and a soft, damp cloth. Hard water stains may be removed using a 50/50 solution of white vinegar and water.  Make certain that you rinse thoroughly with water afterward.
  
  If additional cleaning is required, all of our finishes may be cleaned with the following household cleaners: Formula 409® Antibacterial All Purpose Cleaner, Fantastik® All Purpose Cleaner, or Windex® Original Glass Cleaner, when used according to the manufacturers' instructions for use. 
  
  Avoid using the following which can damage your finish:

  • Avoid industrial cleaners and abrasive cleaners, such as those used for toilet bowls, green Scotch-Brite heavy duty scrub sponges, Scrubbing Bubbles Bathroom Cleaner and Lysol Basin Tub, Soft Scrub, and Tile Cleaner.
  • Avoid products that state on the label that they remove tarnish and rust, and those containing hydrofluoric, hydrochloric and/or phosphoric acids and caustic agents.
  • Avoid harsh abrasives or polishes
  • Avoid bleach-based cleaners